Automatic Cartonning box packing Machine
Product Desriptions
SBP-80 automatic cartoning machine is developed by our own company with features of small cubage, light weight, widely used, high efficiency, multi purpose gathered in a machine features, and also can be connected to blister packing machine to become a production line, and qualified to GMP standard.
This machine is suitable for packing blister, round bottles, abnormal bottles or any other products. It can automatically fold leaflet, open carton, inset production along with leaflet, emboss letters, close the carton, and so on.
This machine is controlled by PLC. The photoelectricity will control each movement. While there is anything abnormal during running, the machine can stop automatically and display the reason on touch screen, so that it will be easy for you to clear the malfunction.
1,Usage and Apply Scope
SBP-80 automatic cartoning machine is applied for medicine, foodstuff, cosmetic and small vessel packing, with function of wide usage, high efficient, stable running and also with performance characters of:
- can automatically fold leaflet, open carton, insert blister into carton along with leaflet, emboss letters, close carton, etc.
- this machine is controlled by PLC. The photoelectricity will control each movement. While there is anything abnormal during running, the machine can stop automatically and display the reason on touch screen, so that it will be easy for you to clear the malfunction.
- there are main driving motor and clutch detent in machine base, and overload safeguader in each transmission system on machine plate. Thus when overload, the main driving motor and each transmission parts will separate to ensure safety of whole machine.
- this machine is with reject device. The leaflet, blister, carton will go through sensor inspecting, and output after letter embossing and carton closed. Thus if there is no leaflet or blister, the carton will be rejected.
- this machine can be separately used, and also can be connected to blister packing machine or any other equipment to be production line.
2,Packing Material Selection
Due to the quality of packing material may directly effect final packing quality, therefore there is high requirement for carton for this machine. Generally cartons should be made of 250g/m2-350g/m2 imported white plate box, and also there is some facture technics requirements for carton.
the leaflet should be made of 60 g/m2-70 g/m2paper, and it should be clean, flat, no rough edge, no winding side, no horniness block, no granule, and if there is no any force, it cannot became delamination.
3,Main Technology Parameters
Main Motor Power: 1.5KW
Max Capability: 80 boxes/min
Overall Size: 3200×1320×1700mm (L*W*H)
Weight: About 1200Kg
Box Size : Max: 200×85×70mm (L*W*H)
Min: 55×25×12mm (L*W*H)
leaflet Size : Max: 220×180mm (L*W)
Min: 100×100mm (L*W)
Noise: <85db
Electrical Apparatus Components List
| Symbol |
Description |
Model No. |
Q'TY |
Remarks |
| P1 |
Human-Machine Interface |
GOT1000 |
1 |
Mitsubishi |
| PLC |
Program controller |
FX2N-48MR |
1 |
Mitsubishi |
| U1 |
Transducer |
FRS8500 |
1 |
Mitsubishi |
| QF1 |
Breaker |
DZ47/2P/16A |
1 |
SCHNEIDERS |
| QF2 |
Breaker |
DZ47/1P/1A |
1 |
SCHNEIDERS |
| QF3 |
Breaker |
DZ47/2P/6A |
1 |
SCHNEIDERS |
| QF6 |
Breaker |
DZ47/1P/6A |
1 |
SCHNEIDERS |
| KM1 |
Contactor |
CJX2-1810 |
1 |
SCHNEIDERS |
| KA1-KA3 |
Relay |
MY4NJ/220V |
3 |
SCHNEIDERS |
| U2 |
Switches power |
S-50-24 |
1 |
Mingwei, Guangzhou |
| TC1 |
Transformer |
220V/127V/18V/50W |
1 |
Special |
| YV |
Electromagnetism valve |
4V210-08 |
1 |
|
| M1 |
Electrical motor |
DLZ-102 |
1 |
|
| X4-X6 |
Proximity switch |
SH-05NK |
3 |
ORMON |
| X1-X2 |
Proximity switch |
0B-D04NK |
2 |
ORMON |
| X3 |
Photoelectric switch |
E3J2-RDY1 |
1 |
ORMON |
| X7-X11 |
Stroke switch |
JLXK1A-411 |
3 |
|
| S1 |
Connection post |
JHUK-6N |
70 |
|
| SB1-SB2 |
Button |
Y090 |
2 |
CHNT |
| SA1 |
Emergency |
Y090 |
1 |
CHNT |
4,Transportation and Installation
Carefully check machine whether it is under good station. Meanwhile check tools according to "packing list" if everything is ok. If find anything is not fine, please contact our company as soon as possible.
Transportation:
Use only thick twine, and avoid to use iron chain or steel wire. The thick twine should go through every machine jut, and all the touch surface should be protected with rubber, sponge etc flexibility objects.
Installation:
1. Place at the good ventilation and illumination space.
2. Set aside 1.5m width space in the round for ease operate and mend.
3. 380V-50Hz 3-phase AC electrical power, good ground line connection.
4. Machine should place on the level ground, after finish install, checking with gradienter. If not level, adjust the four legs under machine.
5. After finish installing, carefully check components whether loosen, if have, should fasten it immediately. To antirust, machine was covered with grease paper before consigning, so shall clean the excrescent grease with fiber cotton cloth and alcohol. After cleaning, re-oil every lubricate joint.
5,Normal Use Condition:
Surrounding Temperature: 20±10ºC
Compress Air: 0.6Mpa, flux should> 0.6m3/min
Operating personnel: 1-2 person
Application field:
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Please don't be hesitate! Contact us and get more vacuum emulsifying machine details!
-------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Customer factory:
Show Room:
Our factory:
Packaging Details
Filling machine packed by packed with seaworthy strong wooden case as the general export package. We use carton as inner packing, in case of damage in the course of carriage, we also can pack it according to clients' requirements
Why Choose Us
Base on our rich experience, high quality, perfect service, timely delivery, and competitive price, we believe that it must be a pleasure cooperation once you choose us!
FAQ:
1.How to send my enquiry?
You can contact us by email, phone call, Instant Messenger
2.How long can I get feedback after enquiry?
We will reply you within 2hrs.
3.What is the package?
Machines will be packed by plywood case.
Our Service:
Pre-sales service:
1> Engineering design
2> Equipment model selection guide
3> equipment machinig
After-sales service:
1> one year from date of delivery, if any spare parts be broken within warranty and not caused by improperly operation, we would offer the new parts for free.
2> Provide professional after-sales service engineers to abroad installation and debugging.
Audited Supplier 
){kind=link}
){kind=link}